Time limit is exhausted. Please reload CAPTCHA. 9 × seven =
CANTY specializes in Mud Flow Analysis as well as Drilling Mud PSA.
Name
Email address
Phone
Inquiry
Features:
• Inline Particle size down to 1µm
• Analysis of oil or water based mud
• Detect oil / water / solids / gas
• Volume Flow Analysis
• Fluid Front Detection
• Real-Time Viewing
• Lab Particle size down to 1µm
The CANTY SolidSizer™ is a vision-based sensor used with the CANTY Vector System image processor for dry sand size measurement in a laboratory environment. The CantyVision™ Software accurately measures multiple aspects of the sand from area / perimeter / minor and major axis / etc. In comparison to a sieve which measures only minor axis the CantyVision™ software can correlate directly to a sieve so the customer does not have to change any QC documents. The SolidSizer™ can correlate within 2% of a sieve. A typical sieve analysis takes anywhere from 20-30 minutes including cleaning and setup for a 70-100 gram sample. On the SolidSizer™ that same sample takes less than 2 minutes. Also multiple screen distributions can be setup to accommodate multiple customers or areas in the process, hence eliminating the need for multiple runs on the same sand for different size distributions. After correlating to current methods of minor axis, customers find benefit in comparing minor axis to major axis and making sure the sand is round instead of needle shaped. Reduce lab time and make sure production samples are not skipped over due to lack of sample time available!
Canty InFlow technology images the fluid to capture color and particle size, shape and distribution if desired. Systems have a fused glass-to-metal, smooth interface with the process which enables use in high temperature and pressure environments, and minimizes maintenance of the interface in extreme environments.
Vector Control Modules (VCM’s) serve as image processors for any of CANTY’s applications requiring analysis. These units are built as a turnkey solution to ensure the most convenient and simple startup for a camera system. VCM’s can power camera systems using power over Ethernet (POE) and come pre-loaded with application specific software to best serve your needs. With three different families of models, CANTY provides a variety of VCM’s to fit the needs of your installation. See our product brochure for additional information!
CANTY specializes in many applications for the fertilizer industry. Particle Size Analysis for Urea and Ammonium Nitrate using the SolidSizer to replace sieves to give a more repeatable and accurate measurement for size, area, shape etc. High Temperature cameras combined with CantyVision software enable complete remote control of the platinum gauze. This provides safety as there is no need for an operator to be near the unit when it is starting up. Centrifuge cameras are used for wash optimization.
Canty has over 30 years in the chemical industry, and that experience has allowed Canty to supply the Adhesives & Resin industry many different applications. To include explosion proof Class 1, Division 1 vessel cameras, and our outstanding Fuseview sight glasses. Other applications include gel detection and color analysis of the finished product.