Industry Applications

Customers, no matter the industry, expect solutions that will help solve issues, improve quality, increase productivity, and reduce cost. As a partner, Canty can offer many solutions to these tough issues. Find out more by selecting your industry below.

Application List

Showing 1–9 of 42 results

BATCH MELT FURNACE MONITORING (SAND MELT LINE)

An ExtremeTemp™ camera is installed in the batch melting furnace to allow for continuous visualization of the process conditions from the control room. CantyVision™ image analysis software can be configured to measure if unmelted sand has crossed the batch line within the furnace. The Vector Control Module sends a continuous signal to the control system for automated control of the input product feed rate and avoids sending un-melted product downstream. Multiple measurement points can be configured on the one image, with measurement outputs available individually, or as an average of all the measurement points.

MORE INFO
POOL MONITORING IN TIN BATH/ONION SKIN
Camera allows for the automated control of the positon and shape at the initial draw in front of the tin bath (also known as the onion skin) resulting in a more uniform pull

Result is Less Waste and Higher efficiency for the glass

Can view through existing ports/no major modification to integrate
MORE INFO
STONE DETECTION

On a float glass line with glass coating taking place, an ExtremeTemp™ camera is mounted in the upper region of the tin bath, to not only provide an unrivalled view inside the process, but also to automatically detect the presence of foreign objects (stones from refractory, insulation etc.) on the glass surface. If undetected, these foreign objects move downstream where they can become lodged on the coater, and cause scratches and imperfections on the glass as it passes by.

MORE INFO
Asphaltenes

Features:

• PPM/PPB & particle size distribution

• Water droplet / solids / gas detection

• Image based – real time analysis

MORE INFO
REBAR / ROUND BAR LENGTH

Using image analysis CANTY can track the position of rebar or round bar with accuracy to within 1/2”. A tracking tool is displayed on the operator screen image at all times, to allow the user to visually verify what point is being tracked by the software. Control outputs are available to the DCS via OPC, 4-20mA and Modbus TCP/IP.

MORE INFO
TEMPERATURE MEASUREMENT

CANTY manufactures high temperature camera systems that are used to measure the temperature of materials 1,000°F and higher. In this temperature range, most materials emit light in the visible spectrum due to blackbody radiation that is able to be measured to determine temperature on a visible spectrum imaging system. This allows Canty to measure temperature in applications including tube metal, refractory, metal sheets/slabs, etc…

MORE INFO
FURNACE MONITORING

CANTY manufactures embedded camera systems that can provide a view into furnaces operating at temperatures up to 3000°F. These camera systems are used for a variety of applications including but not limited to view-only, temperature measurements, level measurements, position tracking, etc… Various camera systems are available for different types of installations.

MORE INFO
HOT RAIL LENGTH

Canty specializes in monitoring HOT RAIL LENGTH. Using an Ethernet CCD camera, the rail length, thickness and temperature can all be monitored real time from one device.

MORE INFO
POWDER METAL PROCESSING

Canty specializes in many applications in POWDER METAL plants. Some of these include particle size analysis & high temperature cameras to monitor the pour.

MORE INFO

1
2
3
4
5

TOP